Rubber Sheets

Approx. Rs 3,250 / KilogramGet Latest Price

• Viton is a brand (name registered trademark of DuPont Performance Elastomers L.L.C.) of synthetic rubber and fluoropolymer elastomer which is essentially used in the production of O-rings and other moulded or extruded goods. It is also popularly known as Fluoroelastomer or FKM sheets.

• The chemical and physical properties of Viton rubber sheets that make it extremely popular for usage are:
• The Viton Rubber Sheets exhibit excellent resistance towards high temperature and low compression set which allows it to be a preferred choice for the lining of hoses in the automobile industry. Also, the Viton sheets are resistant towards prolonged exposure to petroleum oils even in high temperatures.
• The Viton sheets have the best resistance to chemicals and most organic solvents as compared to all the other synthetic rubber sheets.
• The FKM sheets have excellent resistance over the operating temperature ranging from -20 F to +400 F towards Oxygen
• Synthetic hydraulic fluids
• Mineral oil
• Ozone
• Aromatics
• High temperatures
• Chemicals
• The gas permeability of the PKM sheets is extremely low and similar to Butyl Rubber sheets. However, it exhibits a poor performance when exposed to bases, ethers and ketones.

• The major usage of Viton is for the manufacture of goods made by moulding or extruding. Some of them are:
• O-rings
• Gaskets
• Seals
• Sports equipment manufacturer
• Scuba diving equipment
• Automobile and transportation industry
• A lining of hoses transporting fuel

Additional Information:

Approx. Rs 2,850 / KilogramGet Latest Price

dataseal offers Fluoroelastomer or FKM ( Viton ) which has excellent resistant to ozone, oxygen, mineral, oil, synthetic hydraulic fluids, fuels, solvents & chemicals, aliphatic and aromatic hydrocarbons, acids, alkalis and even oxidants.

FKM  Viton has Low permeability to gas, air and high dielectric strengths.

High resistant to temperature( - 20°C to + 240^oC) and intermittent heat of up to 300º C.

FKM's exhibit good flame resistance and are usually self extinguishing upon removal of flame source.

Approx. Rs 450 / KilogramGet Latest Price

Approx. Rs 650 / KilogramGet Latest Price

• Ease of use
• Smooth operations
• Serves the purpose efficiently

Approx. Rs 500 / PieceGet Latest Price

Dataseal offers Silicone rubber sheets to withstand repeated steam and dry heat sterlisation, excellent for medical application ,electrical insulation, differentially permeable to various gases will operate at temperatures from -60 to 200 deg.C, resistance to ozone, oxidation, u.v light, corona discharge, cosmic radiation.

Transparent & red silicone rubber sheets, natural rubber sheets, chloroprene rubber sheets, silicone sheets from 40 hardness to 80 hardness, conductive silicone rubber sheet, silicone sheet with fabric for pressure application, to withstand flame retardant, and other rubber sheet, Viton, EPDM, Neoprene, Nitrile etc.

Additional Information:

Approx. Rs 600 / KgGet Latest Price

Foodgrade & Medical Grade solid silicone sheet rubber is used primarily in health care applications..

Medical Grade silicone exhibits a wish list of characteristics including superb chemical resistance, high temperature performance, good thermal and electrical resistance, long-term resiliency, and easy fabrication.  It also possesses excellent UV and ozone resistance. This material is low volatile, peroxide free; platinum cured and does not discolor over time.  Silicone is odorless, tasteless, chemically inert and non-toxic.  It offers all FDA approved ingredients, low compression set and fungus resistance. 

Approx. Rs 145 / PieceGet Latest Price

Dataseal offers Rubber sheets to meet Foodgrade, Pharmaceutical grade, industrial grade, commercial grade specifications and more demanding specifications required for such applications as bridge bearing pads and industrial machinery isolation mounts..

Length: 1 Mtr, 2 Mtr , or running length ( 5 to 10 Mtrs or more ),Width: 1 Mtr, 1.2 Mtr or more

Thickness: 1.5 mm to over 25 mm ( with or without reinforcement ) ,

( Note : With reinforcement thickness of 0.5mm, 0.8 mm, and 1mm )

Reinforcement: with Nylon, Polyester, Fiberglass.

Colour: Transparent, Red, White in Silicone all colour shades possible in other rubbers.

Additional Information:

Approx. Rs 20 / UnitGet Latest Price

Dataseal offers Silicone Sponge Seals and Gaskets having good thermal and low pressure UV stable sealing properties. It is an excellent medium  where low weight is a factor. The ability to fill uneven gaps around door frames is also a leading attribute of this product.

Available in Low, Medium and High Density Sheets or Extruded Tubes and Profiles. Prototype complex gaskets can be cut using customers own designs.

Approx. Rs 1,950 / KilogramGet Latest Price

• Unique compound
• Long lasting use
• Cost effective

Approx. Rs 650 / KgGet Latest Price

• Butyl rubber sheets are also known as isobutyl-isoprene rubber (IIR) in the commercial world. They are manufactured by polymerizing of 98% isobutylene with 2% of isoprene, which is a naturally occurring organic compound produced by many plants. The compound has wide industrial usage due to its remarkable property to retain air and its resistance against any form of deformation due to the extreme heat or weather conditions. These distinguishing features also make it the preferred choice in the automobile industry for inner tube manufacture.

• The IIR has low moisture permeability due to its closely knit molecular structure.
• The same structure is responsible for its excellent resistance against ozone and chemical attack.
• The IIR has got excellent ageing stability making it last long without replacement or repair.
• It has got very high hysteresis.
• It has extremely low levels of saturation.
• It can be used in an extremely wide range of temperatures lasting from -45C to +130C.
• The low resilience of the IIR makes it an ideal material for vibration damping.
• It is used with hydrocarbons and oils due to its low resistance.
• It does not tear easily.
• It is extremely resistant to flexing, abrasion and weathering making it an excellent choice for outdoor usage.

Approx. Rs 115 / KgGet Latest Price

• Natural rubber is the only naturally occurring rubber that is used for commercial purposes. The rubber plant is native to South America of the Valley region; however, many plantations have been grown in India, Indonesia, Thailand, Sri Lanka and Malaysia. This is the reason that natural rubber is also known as Indian Rubber. The Natural rubber (NR) is a polymer of organic compound isoprene with minor impurities of other organic compounds along with water.
• The NR is derived in the form of latex form a selected group of trees. The latex is sticky and milky colloid when extracted from the bark of the trees and collected in a vessel. This entire process is called “Tapping” and the extracts are later refined for the production of rubber.

• The natural rubber has several unique properties:
• It is used for the manufacture of many other products and rubber types, by blending them with other ingredients in appropriate proportions.
• The NR sheets have high abrasion resistance, elongation and Tensile strength.
• It has an extremely broad hardness range and has the highest resilience among all the rubbers.
• The NR is strong and can endure extreme temperatures ranging from -50C to +90C.
• It is known to have extreme tear strength and fatigue resistance with high compression enabling it to work under low temperatures for dynamic applications.
• The natural sheets are susceptible to vulcanization and ozone attack which causes cracking.
• They are stretchy, flexible and waterproof by nature.

• Door and window profiles
• Hoses
• Belts
• Gaskets
• Matting
• Flooring
• Dampeners

• Gloves
• Toy balloons
• Adhesives
• Rubber bands
• Pencil erasers

Approx. Rs 650 / KilogramGet Latest Price

Approx. Rs 460 / KgGet Latest Price

Neoprene or Chloroprene is a homo-polymer of chloroprene or chloro-butadiene. It has excellent mechanical and good abrasion properties. It displays good resistance to heat, Sun, ozone and weathering and also gives good adhesion to metal. The recommended operating temperature range is between -40°C to +125°C. It has good resistance to inorganic hydrocarbons. We also offer flame retardant grades..

Neoprene  Rubber Sheers are manufactured in a wide Range of Colours like Black, Red, Green, Blue or other colours on Request. One side or both side smooth or fabric finish can be supplied. FDA approved neoprene Sheets can be offered.

 1 Mtr x 2 Mtr,   1Mtrs x Long length,

 1.2 Mtrs x Long length, Rubber Sheets are Available in 1mm to 50mm thickness

Approx. Rs 285 / KilogramGet Latest Price

• EPDM rubber sheets are primarily made from EPDM which is an M-class elastomer made of ethylene and propylene with diene component that is essentially used to strengthen it. These rubber sheets are synthetic polymers with low density and have rapidly become one of the most popular as the general-purpose rubber sheets.

• The EPDM rubber sheets have outstanding resistance to oxygen, ozone and heat.
• They have the ability to accept high loads of reinforcing agents, fillers and plasticizers.
• EPDM rubber sheets have been designed by ASTM as M-class rubbers having a chemically saturated polymer chain of the polymethylene which gives them excellent resistance to environmental and chemical degradation.
• These sheets can operate under an excellent range of temperature, ranging from (-45 C) to +120 C.
• Its ability to resist oxidation makes it a fine choice for outdoor applications without much wear and tear.
• It has outstanding resistance to abrasion and flexes fatigue along with extreme thermal and environmental stability.

• It has a high insulation which makes it suitable for the use of making seals.
• It can be used in cold rooms.
• Used to make the seal of industrial respirators.
• Used in glass run channels
• Radiators
• Garden
• Appliance hoses
• Tubes
• •Pond liners
• Washer
• Industrial belts
• Electrical insulation of various products
• Industrial vibrators
• Solar panels

• It is also used to surround speaker cones
• Electrical joint cables
• Roofing
• Rainwater harvesting sheets
• Geomembranes
• Rubber mechanical goods
• Plastic impact modification
• Thermoplastic uses
• Vulcanizates
• Automobile industry uses:
• It is used to make door seals in vehicles
• Window Seals
• Trunk Seals
• Hood Seals
• Hoses for cooling circuit system
• Thermostats

Approx. Rs 150 / KilogramGet Latest Price

• Our range of Silicone Solid Rubber Sheet is fabricated using premium grade rubber sourced from trusted vendors. These rubber sheets are widely appreciated in the market for their exclusive features and find the extensive application. Available in various technical specifications, our range of silicone rubber sheets can also be customized as per the requirement set by the clients.
• The rubber sheets we offer meets the commercial grade specifications, industrial grade, pharmaceutical grade, food grade and other specifications required for such applications as bridge bearing pads and industrial machinery isolation mounts.

• Width 1mtr / 1.2 Mtr
• Length: 1 Mtr, 2 Mtr or running length (5 to 10 Mtrs.)
• Reinforcement: with Nylon, Polyester, Fiberglass.
• Colour: Transparent, Red, White in Silicone all colour shades possible in other rubbers.
• Rubber Range: Silicone, Viton, Polyurethane, Nitrile, EPDM, Neoprene, Natural, Butyl etc.
• Also offered PTFE Sheets in size range 1 Mtr x 1 Mtr in thickness of 0.3 mm to over 25 mm.

Approx. Rs 500 / PieceGet Latest Price

• Remarkable tear strength
• Impeccable finish

• Our range of silicone rubber sheets are fabricated using premium grade rubber sourced from trusted vendors. These rubber sheets are widely appreciated in the market for their exclusive features and finds extensive application. Available in various technical specifications, our range of silicone rubber sheets can also be customized as per the requirement set by the clients.
• The rubber sheets we offer meets the commercial grade specifications, industrial grade, pharmaceutical grade, food grade and other specifications required for such applications as bridge bearing pads and industrial machinery isolation mounts. 

• Width 1mtr / 1.2 Mtr 
• Length: 1 Mtr, 2 Mtr or running length (5 to 10 Mtrs.) 
• Reinforcement: with Nylon, Polyester, Fiberglass. 
• Color: Transparent, Red, White in Silicone all color shades possible in other rubbers. 
• Rubber Range: Silicone, Viton, Polyurethane, Nitrile, EPDM, Neoprene, Natural, Butyl etc.
• Also offered PTFE Sheets in size range 1 Mtr x 1 Mtr in thickness of 0.3 mm to over 25 mm.

Approx. Rs 650 / KilogramGet Latest Price

Approx. Rs 295 / KilogramGet Latest Price

Approx. Rs 200 / PieceGet Latest Price

Length x Width -
1mtr x 2mtr,
1Mtrs x Long Length,
1.2 Mtrs xLong length,
1.5 Mtrs x Long length &
OR As Per Customer Requirements.

Approx. Rs 350 / KgGet Latest Price

• Styrene-Butadiene rubber (SBR) belongs to the family of synthetic rubbers that is derived from Styrene and Butadiene. The SBR exceeds all synthetic rubbers in consumption as it is very widely used in the automobile industry for the manufacture of tyres because of its excellent abrasion resistance and ageing stability. The SBR rubber was initially marketed by the name of BuNa-S because of its content concentration of Butadiene (Bu), Sodium (Na) and Styrene(S).

• The SBR is a polymer derived from two monomers - styrene and butadiene. The polymerization can be conducted by using two distinct processes hence two different types of SBR are produced namely S-SBR (Solution-SBR) and E-SBR (Emulsion-SBR).

• Most of the chemical and physical properties of the SBR resemble the natural rubber (NR). However, there are a few distinguishing features that make it better than the NR:
• The SBR has better resistance to heat than NR; however, it has poorer tear strength and fatigue resistance in comparison to NR sheets.
• It has excellent abrasion resistance, tensile strength and ageing ability when protected by additives which makes it an excellent choice for tyres in automobile industry.
• Also, it is extremely flexible, tough and multifaceted adding to its properties for usage in automotive, coal mining and construction industries.

• More than 50% of the automobile industry uses SBR for the manufacture of car and truck tyres.

• Shoe heels and soles
• Gaskets
• Chewing gum
• It is used as a resin to bind pigmented coatings on papers.
• Speaker driver manufacturers it as a material for low damping rubber surrounds in the speakers.
• Building or construction application:
• Sealing and binding agent behind renders as it has the properties of extreme durability, reduced shrinkage and increased flexibility along with being resistant to emulsification in damp areas.
• Used for “tanking” damp rooms or surfaces especially for basement constructions.

Additional Information:

Approx. Rs 380 / kgGet Latest Price

• Rubber belongs to the family of unsaturated copolymers and is also commonly known as Buna-N, Perbunan, acrylonitrile Butadiene rubber and NBR.

• The NBR sheets have an excellent resistance towards abrasion and gas diffusion.
• NBR sheets have a great affinity towards a wide variety of surfaces due to the polarity of the Nitrile Rubber Molecules which makes it an excellent adhesive for the industrial sector.
• It can work under a high operating temperature ranging from -30C to +120 C.
• The NBR sheets show rapid depletion if exposed to direct sunlight or moderate to high atmospheric ozone.
• The NBR sheets were primarily designed to prevent oil attack due to its excellent mechanical properties which remain intact even when it is directly exposed to oil and grease for a prolonged period.

• It is used in the making of disposable Non-Latex Gloves
• Automotive transmission belts
• Hoses
• O-rings
• Gaskets
• Oil seats
• V belts
• Synthetic leather
• Printer’s form rollers
• Cable jackets

• NBR latex is used in the preparation of adhesives
• Manufacture of pigment binders

Approx. Rs 255 / KilogramGet Latest Price

• Flawless finish
• Long service life
• Excellent strength.

Approx. Rs 1,200 / PieceGet Latest Price

• Long lasting use
• Easy to maintain
• Available in varied colours.

• Employs the latest tools and technology
• Incorporate all the vital components
• Good performance

Approx. Rs 2,800 / KilogramGet Latest Price